Installation guide
Fitted in under an hour.
Follow along one step at a time. Every connection is push-fit, and everything you need is in the box.
Before you start: check your system
- Dimensions (L × H × W)
- 346 × 222 × 77 mm
- Cartridge only (L × H × W)
- 245 × 222 × 77 mm
- Net weight
- 1.65 kg
- Input water pressure (max)
- 3 bar / 300 kPa / 43 psi
- Maximum input TDS
- 10 ppm
- Ideal room temperature
- 15 to 45 °C
- Cartridge replacement
- 1,000 litres or 12 months, whichever comes first
Install Waimin upright, after your filter and before the drinking water tap. It will not work lying down.
Contains magnets. Keep at least 6 inches from an implanted heart device.
Plan the space
Look at the suggested kitchen installation drawing provided on the base of the Waimin Drinking Water Remineralizer box and plan the space in the under bench cupboard.
Warning: The Waimin Remineralizer must be installed between the filtration system and the water filter tap. Always install it upright. Do not lay the unit down, as it will not operate correctly.
Good to know: ▶◀ marks where the existing filtration outlet line will connect to the new shut off valve.
See all 11 steps
The printed manuals
Read the booklet, or keep a copy
The same instructions as the booklet in your box, page by page.
Translated versions in more languages are on the way.
Still stuck?
More help
Prefer to watch?
Short videos on fitting the unit and replacing the cartridge are on the way.
When to replace the cartridge
Every 1,000 litres or 12 months, whichever comes first. Work out your date.
Talk to a person
Stuck partway through? Our team replies within 2 business days.